WIPER / WASHER: RELAY: ON-VEHICLE INSPECTION (2008 Sequoia)

Last Modified: 11-29-2007		1.6 G
Service Category: Vehicle Exterior	Section: Wiper/Washer
Model Year: 2008	Model: Sequoia	Doc ID: RM000001T9S007X
Title: WIPER / WASHER: RELAY: ON-VEHICLE INSPECTION (2008 Sequoia)

ON-VEHICLE INSPECTION

1. INSPECT HEADLIGHT CLEANER CONTROL RELAY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
6 (PB)- 4 (E)	When battery voltage is not applied between terminals 3 (IG) and 2 (H)	10 kΩ or higher
6 (PB)- 4 (E)	When battery voltage is applied between terminals 3 (IG) and 2 (H)	Below 1 Ω (0.8 to 0.9 seconds, then no continuity exists)

If the result is not as specified, replace the headlight cleaner control relay.